BITUTHENE® Primer N

Ancillary product contributing to successful application of waterproofing systems

Product Description

BITUTHENE® Primer N is a bitumen-based primer in solvent which is designed to penetrate and seal porous surfaces to provide good initial adhesion and excellent permanent adhesion of Bituthene Waterproofing Membranes under many kinds of conditions.

Uses

Bituthene Primer N is used to prime many substrates such as metal, slate and all structural concrete, masonry and wood surfaces, on which Bituthene Waterproofing Membranes are to be applied.

Bituthene Primer N is an integral part of the Bituthene Waterproofing Systems. Sufficient primer must be used on the dry surface to condition it to a dust-free state that is suitable for the application of Bituthene Waterproofing Membranes. Other applications include anti-corrosion coating for metal surfaces.

Applications

Bituthene Primer N may be applied by spray, roller or brush. Use a heavy nap roller with natural material such as lamb’s wool to avoid deterioration.

Apply Bituthene Primer N to clean, dry, dust-free and frost-free surfaces at different suggested coverage per litre. Deep puddles of primer should be avoided as this will lengthen drying time. Rollers or brushes should be dipped into pans to avoid pouring primer directly on the deck and creating puddles. Stir emulsion well before use and allow solvent for evaporate before application of other materials. Allow Bituthene Primer N to dry two hours, or until tack-free. On warm days drying may require as little as 30 minutes.

Priming should be limited to what can be covered with Bituthene Waterproofing Membrane in a working day. Any area not covered  with membrane during the day must be re-primed. Be sure to cover open pails when not applying primer.

Clean tools with white or mineral spirits or paint thinner at the end of each day. Rollers can be wrapped tightly overnight in plastic film or release paper from Bituthene Waterproofing Membrane. (White or mineral spirits and paint thinner are combustible liquids and should be used with care in accordance with the safety instructions of the manufacturer.)

Suggested Covering Capacity Per Litre*

Mild Steel 10 – 16m2
Concrete 5 – 8m2
Lightweight Screed 2 – 4m2

Health and Safety

Bituthene Primer N vapour is flammable. Read the product label and Material Safety Data Sheet before use. Users must comply with all risk and safety phrases.

Technical Services

For assistance with working drawings for projects and additional technical advice, please contact GCP Applied Technologies.

gcpat.hk | For technical information: asia.enq@gcpat.com

We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.

Bituthene is a trademark, which may be registered in the United States and/or other countries, of GCP Applied Technologies, Inc. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.

© Copyright 2016 GCP Applied Technologies, Inc. All rights reserved.


GCP Applied Technologies Inc., 2325 Lakeview Parkway, Alpharetta, GA 30009, USA
GCP (Hong Kong) Ltd., 6 On Chuen Street, On Lok Tsuen Ind Area, Fanling, Hong Kong
This document is only current as of the last updated date stated below and is valid only for use in Hong Kong. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.hk. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.

Last Updated: 2023-07-07

https://gcpat.hk/en-gb/solutions/products/bituthene-post-applied-waterproofing/bituthene-primer-n