BITUTHENE® GLM

Liquid-applied waterproofing membrane for sub-structures and flat deck applications

Product Description

BITUTHENE® GLM is a one-component, elastomeric, liquid-applied waterproofing membrane for variety of applications including basements and flat decks, and for use in conjunction with Bituthene sheet waterproofing membranes.

Applications

Bituthene GLM is a one-component, liquid-applied waterproofing membrane for both vertical and horizontal applications, detailing and basement applications.

Bituthene GLM may be used as a stand-alone waterproofing system or in conjunction with Bituthene sheet waterproofing membranes as a detailing aid and for smoothing out rough concrete substrates. Bituthene GLM cures to a very smooth, tough and flexible rubber-like waterproofing layer.

Bituthene GLM is ideal for waterproofing for both concrete and masonry and may be used in both new construction and retrofit applications. Typical applications include foundation walls, earth sheltered structures, and split slab construction, both above and below grade, such as plaza areas and parking decks. Interior uses may include mechanical rooms, kitchens and bathrooms.

Bituthene GLM is ideally suited for use with Bituthene sheet membranes as a:

  • Fillet and reinforcement material at inside corners

  • Flashing materials around drains, protrusions, curbs and parapets

  • Sealing material at terminations

  • Repair material for defects on concrete surfaces

Product Advantages

  • Liquid-applied — Conforms to irregular profiles

  • Waterproof — Resistant to water vapour and water pressure

  • Tough rubber-like — Flexible and damage-resistant

  • Seamless — Joint-free membrane

  • Cold-applied — No flame hazard

  • Bituthene compatible — Complements Bituthene sheet waterproofing membrane system

  • No mixing required — Easy to apply, free to mixing problem

Typical Properties

Property Typical Value Test Method
Thickness of Film Min 0.8mm -
Solid Content 90% ± 2 ASTM D1644
Water Vapour Transmission > 16.5g / m / 24 hrs ASTM E96
Elongation > 500% ASTM D412
Store-A Hardness 10 ASTM D2240

 

Installation

Substrate Preparation

Surfaces shall be dry and free from dust, dirt, grease or other contaminants. It may be necessary to wire brush areas where dirt or scale cannot be removed, with a stiff broom.

Check surface for cracks, splits, flashing, coverings, and so on. Where cracks exceed 1mm, they must be filled with fabric matting, followed by a liberal application of Bituthene GLM.

Bituthene GLM should be applied directly from the pail. For priming purposes, please consult your local GCP representative.

Liquid Membrane Installation

Apply Bituthene GLM by brush or roller. Normally a minimum of two coats is required, unless a trowel method of application is adopted. Thickness for two coats in total will be 0.8 to 1.0mm (dry film thickness) or 1.0 to 1.2mm (wet film thickness).

Where Bituthene GLM has to be applied to a height of above 500mm from the floor level, a wire mesh is recommended to be fixed prior to applying the protective render to prevent cracking and to improve adhesion.

Bituthene GLM shall be allowed to cure for 24 to 48 hours before ponding or flood testing.

Coverage

Recommended coverage is approximately 0.8 to 1.2kg / m2.

Supply and Storage

Each 20kg pail of Bituthene GLM in unopened containers and kept in a cool, dry area can be stored for up to 12 months.

Safety and Handling

Bituthene GLM may be harmful. Special precautions are required when used in confined areas. Please refer to Bituthene GLM Material Safety Data Sheet before use.

Technical Services

For assistance with working drawings for projects and additional technical advice, please contact GCP Applied Technologies.

gcpat.hk | For technical information: asia.enq@gcpat.com

We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.

Bituthene is a trademark, which may be registered in the United States and/or other countries, of GCP Applied Technologies, Inc. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.

© Copyright 2016 GCP Applied Technologies, Inc. All rights reserved.


GCP Applied Technologies Inc., 2325 Lakeview Parkway, Alpharetta, GA 30009, USA
GCP (Hong Kong) Ltd., 6 On Chuen Street, On Lok Tsuen Ind Area, Fanling, Hong Kong
This document is only current as of the last updated date stated below and is valid only for use in Hong Kong. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.hk. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.

Last Updated: 2023-07-07

https://gcpat.hk/zh-hant/solutions/products/bituthene-post-applied-waterproofing/bituthene-glm