SILCOR® liquid waterproofing

Truly seamless, tough, long lasting waterproofing, applied fast

Any building that doesn't keep out water won't be habitable for long. SILCOR® liquid waterproofing provides a flexible solution that's extremely tough with long-lasting protection while accommodating complex shapes and detailing.

Documents

SILCOR® Product Documents

Product Name Product Data Sheet
SILCOR ® PU Sealant Flex
Product Data Sheet
SILCOR® 560
Product Data Sheet
SILCOR® 560 LS
Product Data Sheet
SILCOR® 560 LVOC
Product Data Sheet
SILCOR® 575
Product Data Sheet
SILCOR® 580
Product Data Sheet
SILCOR® 780 HI-LP
Product Data Sheet
Silcor® 900MP
Product Data Sheet
SILCOR® 990MP
Product Data Sheet
SILCOR® LM PU Sealant
Product Data Sheet
SILCOR® Primer BS
Product Data Sheet
SILCOR® Primer BW N105-DT
Product Data Sheet
SILCOR® Top Coat 80
Product Data Sheet
Products & Accessories

Products

  • Product Name
  • 描述
  • Key Benefits
  • Applications Type
SILCOR ® PU Sealant Flex
描述

A high performance elastomeric joint sealant based on proven polyurethane elastomer technology. Silcor® PU Sealant Flex is a neutral cure system that reacts on exposure to atmospheric moisture. When cured, it forms a durable waterproof seal, which makes it suitable for most applications. 

Key Benefits
  • Single-pack — no mixing 
  • Low modulus for high movement 25% movement capacity Total adhesion — no water tracking  
  • Hard wearing, permanently flexible 
Application Type

Apply Silcor PU Sealant Flex using a manually or electrically operated closed-barrel caulking gun. Insert bag into gun, cut top of the bag, replace end cap and use. Extrude sealant firmly into joint to ensure complete contact on joint faces. Smooth as required with a spatula and diluted detergent to give a flat or concave surface. 

SILCOR® 560
描述

SILCOR® 560 is a high performance, low odour, one-part, fast-curing, high solids, pure polyurethane elastomer waterproof membrane.

Key Benefits
  • Easy, fast, high build, one-coat application
  • Simple, seamless, fast-cure membrane.
  • Excellent chemical resistance
Application Type
  • Wet areas
  • External (non-exposed) - balconies, roof-decks, sill or window flashings, podiums, planters.
  • External (exposed) - non trafficable areas
SILCOR® 560 LS
描述

SILCOR® 560 LS a high performance, low odour, one-part, fast-curing, high solids, pure polyurethane elastomer waterproof membrane.

Key Benefits
  • Simple, seamless, fast-cure membrane.
  • Excellent chemical resistance
  • Waterproof
  • Permanently flexible
Application Type
  • Wet areas
  • Tanking
  • Horizontal application with self-leveling
SILCOR® 560 LVOC
描述

SILCOR® 560 LVOC is a unique, low VOC, high performance, low odour, one-part, fast-curing, high solids, polyurethane elastomer, liquid waterproof membrane. It is specially formulated for easy roller application of all permanently flexible, tough, high-build, long-life waterproof barriers.

Key Benefits
  • Low VOC
  • Easy, fast, one-coat application with brush or roller is possible
  • Simple, seamless, fast-cure membrane
Application Type
SILCOR® 575
描述

SILCOR® 575 is a one-part, high performance, polyurethane membrane. When combined with SILCOR® Top Coat 80, provides a durable, UV-resistant, foot-trafficable waterproofing system for roofs, decks and plant rooms.

Key Benefits
  • Easy and low cost to install, maintain or refurbish
  • Quick access for trades
  • Waterproof
Application Type
  • Plant room floors
  • Balconies
  • Roof-decks
SILCOR® 580
描述

SILCOR® 580 is a tough, resilient, polyurethane elastomer-based layer rubber barrier giving long-life waterproof protection. It is a premium grade, low VOC elastomer using the latest technology to provide long-life, protective barriers to prestige construction projects.

Key Benefits
  • Long-life, permanently flexible
  • Total adhesion
  • Fully monolithic structure
Application Type
  • Exposed roofing, decks and podiums
  • Car parks and ramps
  • Compactor room floors, plant rooms and wash rooms
SILCOR® 780 HI-LP
描述

SILCOR® 780 HI-LP is a two-part, moderately fast-curing, hybrid polyurea, spray-applied elastomeric coating. It provides a premium quality, high build, long-life protective coating to concrete and metal substrates on major civil, infrastructure and commercial construction projects.

Key Benefits
  • Simple application
  • Long life
  • Slower cure provides smooth surface finish
Application Type
  • Water treatment plants
  • Roof decks
  • Podium slabs
Silcor® 900MP
描述

SILCOR® 900MP is a premium performance two-component spray-applied seamless waterproofing membrane that cures within 2 minutes to form a high-strength, elastomeric, and fully-bonded waterproof membrane. Silcor 900MP is extremely durable with excellent wear and chemical resistance and does not normally require additional protection against mechanical damage.

Key Benefits
  • Seamless
  • Rapid-set
  • Robust
Application Type
  • Roofs
  • Podium decks
  • Terraces
SILCOR® 990MP
描述

SILCOR® 990MP is a two-part, fast-curing, pure polyurea, spray-applied elastomeric coating.

Key Benefits
  • Simple application
  • Potable water certified
  • Suitable for continuous immersion
  • Long-life
Application Type
  • Concrete and metal substrates on major civil, infrastructure and commercial construction projects
SILCOR® Primer BS
描述

A fast-drying, single-pack, modified polyurethane primer for use with all polyurethane and polyurea based membranes.

Key Benefits
  • Strong physical bond to substrate
  • Fast-drying PU resin system
  • Coating is water-resistant and protects the structure in the event of interruption by wet weather
  • Promotes adhesion even in cold weather
Application Type
SILCOR® Primer BW N105-DT
描述

SILCOR® Primer BW N105-DT is a two-component, solvent-free epoxy primer, recommended for use with concrete, masonry
and steel.

Key Benefits
  • Fast-cure
  • 100% solid content
  • Excellent penetration and adhesion to substrate
Application Type

The surfaces of new concrete should be lightly blast abraded or mechanically abraded to
remove laitance. Dust and debris created from blasting or sanding should be removed by
sweeping or vacuum cleaner. Surface must be clean, sound, smooth and free from dust,
laitance, loose matter, oil or other contaminants.

Pour the hardener into the resin and mix thoroughly for 5 minutes until the colour is uniform
using a low speed drill at 200 to 300 rpm. Do not mix more than is required because the
material will gel and harden.

Heat is generated when the resin and hardener reacts and temperatures will increase over
time. Apply soon after mixing. Never mix more than one batch at a time in a single container
as this may cause a premature exothermic reaction with production of intense heat and
smoke.

Apply SILCOR® Primer BW N105-DT by brush, roller or rubber squeegee. Application
temperatures must be between 10°C and 40°C with <85% relative humidity, and at
least 3°C above the dew-point temperature.

SILCOR® Top Coat 80
描述

SILCOR® Top Coat 80 is a tough, fast-curing, non-slip, aliphatic polyurethane coating designed for protection of SILCOR® membrane systems in exposed situations. SILCOR® Top Coat 80 is UV-resistant. It provides a durable, service foot-trafficable finish to roof and deck areas.

Key Benefits
  • Simple application, easy to use and fast-cure
  • UV-resistant and foot-trafficable
  • Fast-cure — quick access for trades
Application Type
  • Used for colour-stable, non-slip exposed areas on plant room and lift motor room, roofs, balconies, decks, perimeter turn-ups, penetrations and sill or window flashings

Accessories

  • Accessory Name
  • 描述
  • Key Benefits
  • Applications Type
SILCOR® LM PU Sealant
描述

SILCOR® LM PU Sealant is a high performance elastomeric joint sealant based on proven polyurethane elastomer technology. Silcor LM PU Sealant is a neutral cure system that reacts on exposure to atmospheric moisture. When cured, it forms a durable waterproof seal, which makes it suitable for most applications.

Key Benefits
  • Good UV resistance, long life
  • Single-pack — no mixing
  • Low modulus for high movement
Application Type
  • Ideal for sealing joints in concrete panels, tiles, fibrous cement products, external cladding panels, block work and brickwork
Overview

What is SILCOR® liquid waterproofing?

SILCOR® is a high performing seamless, liquid waterproofing system for podium decks, green roofs and terraces. Based on advanced chemistries, SILCOR® products are fully adhered, elastomeric waterproofing barriers offering design and application flexibility through spray as well as squeegee application.

Design flexibility with waterproofing confidence

For architects, SILCOR® liquid waterproofing removes several constraints. SILCOR® is truly seamless and will conform to nearly any surface. As such, SILCOR® will accommodate almost any design without compromising waterproofing performance, while being fully compatible with GCP's other waterproofing product solutions.

Build faster without sacrificing water protection

SILCOR® liquid waterproofing also proves its usefulness on the job site. There's no longer any need to halt construction due to strong odours or an obstructed surface. Most importantly, SILCOR® is applied without the need for kettles, propane or open flames. SILCOR® liquid waterproofing lets builders install waterproofing safely and without calling a halt to other construction.

Backed by a world-class reputation

When it's time to invest in waterproofing, invest in a proven technology that comes from one of the world's most trusted manufacturers.  GCP has been in the liquid waterproofing business for more than 20 years. SILCOR® liquid waterproofing has been used in projects ranging from Hong Kong's MTR to Crossrail in London.

Finally, GCP offers a technical services and consultation platform that's second to none. Contact GCP for information on the specific products within the SILCOR® portfolio that are best for your building or project.