SILCOR® Primer BW N105-DT
General purpose, solvent-free epoxy primer
Product Description
A two-component, solvent-free epoxy primer, recommended for use with concrete, masonry and steel.
Features
- Fast-cure
- 100% solid content
- Excellent penetration and adhesion to substrate
- Simple and easy application, high build self leveling
- Good bonding with concrete, sound masonry and steel. Also bonds to damp concrete. Recommended moisture content is <5% based on ASTM F2659.
Application
The surfaces of new concrete should be lightly blast abraded or mechanically abraded to remove laitance. Dust and debris created from blasting or sanding should be removed by sweeping or vacuum cleaner. Surface must be clean, sound, smooth and free from dust, laitance, loose matter, oil or other contaminants.
Pour the hardener into the resin and mix thoroughly for 5 minutes until the colour is uniform using a low speed drill at 200 to 300 rpm. Do not mix more than is required because the material will gel and harden.Heat is generated when the resin and hardener reacts and temperatures will increase over time. Apply soon after mixing. Never mix more than one batch at a time in a single container as this may cause a premature exothermic reaction with production of intense heat and smoke.
Apply SILCOR® Primer BW N105-DT by brush, roller or rubber squeegee. Application temperatures must be between 10°C and 40°C with <85% relative humidity, and at least 3°C above the dew-point temperature.
Coverage
Generally 0.2-0.5kg/m2 dependent on substrate condition, application technique and weather.
More is required for porous concrete.
Packaging
30kg set with 20kg Base + 10kg Hardener
15kg set with 10kg Base + 5kg Hardener
Typical Properties
| PROPERTY | TYPICAL VALUE |
| Colour | Tea, glossy |
| Special Gravity (25°C) | 1.4 +/-5% (Mixed) |
| Mixing Ratio (Base: Hardener) | 2:1 (Weight Ratio) |
| Pot Life | 30 minutes @ 25°C |
| Required time @10°C | Required time @20°C | Required time @ 30°C | |
| Tack-free Time | 6 hrs | 4 hrs | 2 hrs |
| Initial Cure | 24 hrs | 18 hrs | 12 hrs |
| Overcoat Time | 36hrs - 48 hrs | 24 hrs | 16 hrs |
Shelf Life and Storage
All products should be stored internally, in original packaging at temperatures between 5°C and 25°C, relative humidity below 60%. Protect products from all sources of heat, moisture, frost and direct sunlight. Shelf life 12 months maximum.
Health and Safety
Read and understand the product label and Safety Data Sheet (SDS) for each system component. All users should acquaint themselves with this information prior to working with the products and follow the precautionary statements.
SDSs can be obtained by contacting your local GCP representative or office and in some cases from our web site at gcpat.com.
gcpat.hk | For technical information: asia.enq@gcpat.com
We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.
Silcor is a trademark, which may be registered in the United States and/or other countries, of GCP Applied Technologies, Inc. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.
© Copyright 2020 GCP Applied Technologies, Inc. All rights reserved.
GCP Applied Technologies Inc., 2325 Lakeview Parkway, Alpharetta, GA 30009, USA
GCP (Hong Kong) Ltd., 6 On Chuen Street, On Lok Tsuen Ind Area, Fanling, Hong Kong
This document is only current as of the last updated date stated below and is valid only for use in Hong Kong. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.hk. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.
Last Updated: 2023-07-07
https://gcpat.hk/zh-hant/solutions/products/silcor-liquid-waterproofing/silcor-solvent-free-epoxy-primer