BETEC® grouts and cementitious mortars

Quality, performance, expertise.

BETEC® products are grouts and cementitious mortars for underfilling and connecting various structural elements within buildings and infrastructure. BETEC® products are renowned for their stable application, ease of installation, high flowability, long open times, fast early strength development and long-term durability. The overall high performance of these materials is supported by an experienced  technical and field services team . BETEC® products perform all the time, every time under a wide range of conditions and applications.

Documents

BETEC® Product Documents

Product Name Product Data Sheet
AQUATEK® Super XA
Product Data Sheet
Betec® Flex S150
Product Data Sheet
Betec® M-5
Product Data Sheet
OMNITEK® CPC
Product Data Sheet
OMNITEK® Deco
Product Data Sheet
OMNITEK® Grout 5000
Product Data Sheet
OMNITEK® Microconcrete 180
Product Data Sheet
OMNITEK® Paint EC
Product Data Sheet
OMNITEK® Realk Liquid
Product Data Sheet
OMNITEK® RM Fiber
Product Data Sheet
Products & Accessories

Products

  • Product Name
  • Description
  • Key Benefits
  • Applications Type
AQUATEK® Super XA
Description

AQUATEK® Super XA is a rigid, cement based coating and dry broadcast system for crystalline waterproofing of concrete trough saturation of the capillaries.

Key Benefits
Application Type
  • High adhesion and waterproofing performance by saturation of capillaries for long-term waterproofing against negative and positive hydrostatic pressures.
  • Fast setting properties for minimal downtime and rapid completion of the application.
  • Fast, easy and cost effective application by manual application, spraying or dry broadcasting.
Betec® Flex S150
Description

BETEC® Flex S150 is a flexible, two-part, polymer-modified cementitious waterproofing system. The two components of Betec Flex S150 are mixed together with a slow speed drill and paddle to form a smooth slurry. The slurry is applied by trowel or brush, in two coats, to form a hard but flexible waterproof cementitious coating.

Key Benefits
  • Resists both positive and negative pressure
  • Flexible - will bridge drying shrinkage and hair line cracks
  • Seals lightweight aerated blocks and pre-cast joints
Application Type
  • Floor, basement wall and slab
  • Bathroom, balcony, wet area and planter box
  • Water-retaining structure
Betec® M-5
Description

BETEC® M-5 is a special blend of cement, quartz sand and active chemicals in powder form for the protection of concrete against water penetration.

Key Benefits
  • Offers long-term waterproofing even under high water pressure
  • Fully integrated with the concrete
  • Waterproofs concrete deeply
Application Type
  • Floor, basement wall and slab
  • Bathroom, balcony, wet area and planter box
  • Water-retaining structure
  • Parking deck
OMNITEK® Deco
Description

OMNITEK® Deco is a high strength, cement based, volume stable mortar, suitable for levelling and finishing of concrete surfaces in layer thicknesses of 2-5mm.

Key Benefits
  • High early- and final strength properties and excellent adhesion to concrete for a maximum durability and long-term performance.
  • Fast, easy and cost effective application by manual application or spraying.
Application Type
  • High early- and final strength properties and excellent adhesion to concrete for a maximum durability and long-term performance.
  • Fast, easy and cost effective application by manual application or spraying.
OMNITEK® Grout 5000
Description

OMNITEK® Grout 5000 is a cement based, volume stable, flowable anchoring grout, ideally for anchoring of reinforcement steel bars in concrete repair.

Key Benefits
  • High early- and final strength properties for structural repair of concrete.
  • High flowable consistency with long open times for a fast, easy and cost effective application by pumping or pouring.
  • Self-compacting and controlled volume expansion.
  • Adjustable grout volume for void filling applications.
Application Type
OMNITEK® Microconcrete 180
Description

OMNITEK® Microconcrete 180 is a cement based, volume stable flowable repair concrete with high strength and self-compacting properties, ideally for recasting concrete.

Key Benefits
  • High early- and final strength properties for structural repair of concrete.
  • High flowable consistency with long open times for a fast, easy and cost effective application by pumping or pouring.
  • Self compacting and controlled volume expansion.
Application Type
  • Recasting concrete on vertical surfaces.
  • Recasting concrete on horizontal surfaces.
  • Recasting concrete for repair of joints, edges and damaged precast elements and concrete structures.
  • Recasting repairs in structures with a high density of reinforcement steel.
OMNITEK® Paint EC
Description
  • OMNITEK® Paint EC is an advanced water based acrylic paint, specifically designed for long term anti-carbonatation and surface protection according to EN 1504-2.
Key Benefits

High carbonatation resistant and weather resistant elastic coating for long term protection of concrete, masonry and cement rendered surfaces.
One component solution with fast, easy and cost effective application by roller, brush or spraying.
Environmentally friendly, water based and solvent free coating.

Application Type
OMNITEK® Realk Liquid
Description

OMNITEK® Realk Liquid is a single component re-alkalinisation liquid for protecting and upgrading concrete, removing the effects of carbonatation due to creation of an alkaline environment in the concrete.

Key Benefits
  • High re-alkalinisation capacity, effectively removing the effects of carbonatation.
  • One component, ready to use solution with fast, easy and cost effective application by spraying.
  • Compatible with all OMNITEK® and BETEC® cement based repair mortars and concrete.
  • Solvent free.
Application Type
OMNITEK® RM Fiber
Description

OMNITEK® RM Fiber is a fiber reinforced, high strength, high-sulphate resistant cement based, volume stable repair and re-profiling mortar, suitable for concrete repair in demanding environments in the safest, most targeted and productive way in layer thicknesses of 10-50mm.

Key Benefits
  • High early- and final strength properties for structural repair of concrete.
  • Polymer modified for an excellent adhesion, and fiber reinforced for a long-term durable repair without surface cracks.
  • High carbonatation, chloride, freeze-thaw and chemical resistance for maximum durability in all exposure conditions.
  • Stiff plastic consistency for fast, easy and cost effective application by manual application in horizontal and vertical applications.
Application Type
  • General concrete repairs in vertical and horizontal conditions, as well as re-profiling applications of joints, edges and damaged precast elements and concrete structures.
  • Repair of concrete structures exposed to sea water, corrosive environments or severe freezing conditions.

Accessories

  • Accessory Name
  • Description
  • Key Benefits
  • Applications Type
OMNITEK® CPC
Description

OMNITEK® CPC is a single component cement based primer for corrosion protection of steel reinforcement bars according to EN 1504-7 and bonding for cement based repair systems.

Key Benefits
  • High passivation capacity, effectively stopping active corrosion.
  • High adhesion to steel and perfectly compatible with cement based repair mortars and concrete.
  • One component solution with fast, easy and cost effective application by brush.
  • Compatible with all OMNITEK® and BETEC® cement based repair mortars and concrete.
Application Type
Overview

Contractor-friendly application for critical infrastructure solutions

With an extremely broad portfolio at hand, BETEC® users will find a number of products and solutions that encompass every application they might encounter. These include grouts for all application heights, as well as a year-round grouting portfolio. BETEC® products have been adapted to allow contractors to continue working even at cold temperatures. For some of the more specialised BETEC® applications, this performance adaptation is critical.

BETEC® serves the most demanding applications

BETEC® solutions are commonly used for assembling and joining prefabricated structures, for underfilling structural elements such as bridge bearings and block-out connections on beams and columns, and for machine foundations. Machine foundations in particular are where the durability and versatility of BETEC® products begin to shine through.

As an example, BETEC® is commonly used in wind turbine foundations, which are often situated in areas where low temperatures, speed of application and remoteness are factors in construction. Similar conditions are often found in the turbine rooms of hydroelectric dams. Apart from renewable energy, mass rapid transit is also a strong BETEC® application field. There, BETEC® products can be used in rail beds, station boxes and in the foundations for transformation stations. For these applications, BETEC's durability is paramount, but the product also incorporates innovations that make life easier for contractors.

On time, on budget, easy to use

Massive infrastructure projects operate under extreme pressure to conform to the structures of time and budget. For these projects, BETEC® ensures that these goals are met. The major benefit that BETEC® delivers are extremely stable flow and application times. This frees producers from the necessity of adapting water ratios during application. In other words, once the machinery is set correctly, BETEC® will maintain its characteristics until production is complete. Unlike other brands, there is no variation in performance. These contractor-friendly innovations have led to worldwide BETEC® usage. BETEC® is CE marked for use throughout the European Union where applicable, and conforms to the national guidelines for both France and Germany.

Backed by outstanding support, anywhere you need it

We have built our reputation on more than simply, high-quality products and high performing solutions. Our products are trusted globally because of our commitment to providing technical solutions and field support. No matter where you are or what you're building, we can help find a product that will suit your needs.