LifeWorks is a non-profit organisation dedicated to building strong and resilient families. Providing counselling, housing, education/workforce services and youth development, the organisation’s important mission and growth required a new branch to serve as a home and foundation for its programmes and services in Austin, Texas.
The three-story, 33,600 square foot (3,121 m2) building is designed to reflect the organisation’s mission and the spirit of the local community. Designed by Miró Rivera Architects, the building transforms what could have been a typical institutional-looking office building into an animated, welcoming and very functional design.
LifeWorks received a 5-star sustainability rating from the Austin Energy Green Building programme for its innovation and sustainable design, achieving 79.6% less energy use compared to a baseline case study.
A breathable air barrier was required to prevent air infiltration and water egress, while minimising energy loss and maximising the long-term durability of the building. A modest budget added a further constraint.
While traditional building wraps may have fulfilled the budgetary requirement, they may not have been as durable or as permeable in real-world applications.
Therefore, the overall challenge was to find a non-traditional fully-adhered breathable air system that could outperform traditional building wraps.
Perm-A-Barrier® VPS represents a low-cost, high-performing fully-adhered vapour permeable air barrier membrane. For LifeWorks, this meant a solution that saved money while providing a high performance energy-saving solution.
Once the building's OSB substrate was primed, Perm-A-Barrier® VPS was applied throughout the building's first and third floor walls.
It provides immediate airtight protection against the elements. Since the membrane was self-adhered, it removed the requirement for mechanical fasteners and spray equipment. Installation was fast and easy due to the membrane's lightweight and controlled thickness.
In the end, the new LifeWorks branch headquarters was made even more durable and sustainable. As the organisation continues working to build strong and resilient families, they can rest assured knowing that they're building on a solid foundation—a building constructed to provide both savings and sustainability in the long term.
Throughout approximately 10,000 square feet (929 square metres) of shotcrete foundation walls at the Recreation Center, the Perm-A-Barrier® components worked together to form a continuous and integral bond to the structure, to eliminate water migration between the membrane and shotcrete.
"GCP reps came out and were very helpful with the installation of the product”, said Larry Taniguchi, the architect on the project from Cannon Design. “We have a sub-floor drainage system in place so we see water there when it rains, and we haven’t seen any evidence of water coming through the waterproofed walls”.
Blue360sm Product Performance Advantage: Because every project, large or small, deserves the best level of protection.
gcpat.hk | For technical information: firstname.lastname@example.org
This document is only current as of the last updated date stated below and is valid only for use in Hong Kong. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.hk. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.
Last Updated: 2020-08-31