Product Description
MIRA® RT89 is a high performance mid-range water reducer based on new comb polymer technology. It is a ready-to-use liquid admixture with superior dispersing capacity for the cement particles in the concrete mix. This capability exceeds that of normal water-reducing admixtures, resulting in lower dosages, better slump retention and controlled retardation.
MIRA RT89 contains no added chloride and is formulated to comply with BS 5075: Part 3: 1985 chemical admixture specification for concrete. One litre weighs approximately 1.06kg ± 0.02kg.
Applications
MIRA RT89 allows concrete to be produced effectively with low water-cement ratios, especially with medium to high workability characteristics. MIRA RT89 is ideal for use in any concrete where it is desired to keep the water-cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation.
Product Advantages
- Provides long slump life with controlled set times.
- Finishes easily without stickiness, tearing or spotty set characteristics.
- Less susceptible to segregation and bleeding.
- Highly efficient, producing desired slump concrete with enhanced strength.
- Addition can be delayed or it can be added with the concrete mix water.
Addition Rates
Addition rates of MIRA RT89 can vary with type of application, from normal concrete to tremie concrete. Depending on the application, dosage rates can range from 800 to 1,800mL / 100kg of cementitious material. However, in most applications, 800 to 1,500mL / 100kg of cementitious material will be sufficient. For best results, MIRA RT89 should be added with the mix water. At a given water-cement ratio, the slump required for placement can be controlled by varying the addition rate. Should job site conditions require using more than recommended addition rates, please consult your GCP representative.
Dispensing Equipment
Please contact your local GCP representative for further information regarding the dispensing equipment for this product.