Liquid waterproofing
High performance, fast curing, liquid applied, seamless protection
GCP liquid waterproofing products offer high performance with unique characteristics. Liquid waterproofing is cold-applied and cures quickly allowing construction sites to quickly return to full operation.
Liquid waterproofing Product Documents
| Product Name | Product Data Sheet |
| ADPRUFE® AP3 |
Products
- Product Name
- 描述
- Key Benefits
- Applications Type
ADPRUFE® AP3 is an innovative liquid admixture that significantly reduces the water absorption of concrete together with some effect on the reduction of drying shrinkage.
- Significantly reduced water absorption and penetration
- Reduction in drying shrinkage which produces fewer and thinner cracks
- A low water-cement ratio
- Used with ADVA® high performance concrete admixtures, highly effective integrally waterproof concrete is achieved
A high performance elastomeric joint sealant based on proven polyurethane elastomer technology. Silcor® PU Sealant Flex is a neutral cure system that reacts on exposure to atmospheric moisture. When cured, it forms a durable waterproof seal, which makes it suitable for most applications.
- Single-pack — no mixing
- Low modulus for high movement 25% movement capacity Total adhesion — no water tracking
- Hard wearing, permanently flexible
Apply Silcor PU Sealant Flex using a manually or electrically operated closed-barrel caulking gun. Insert bag into gun, cut top of the bag, replace end cap and use. Extrude sealant firmly into joint to ensure complete contact on joint faces. Smooth as required with a spatula and diluted detergent to give a flat or concave surface.
SILCOR® 560 is a high performance, low odour, one-part, fast-curing, high solids, pure polyurethane elastomer waterproof membrane.
- Easy, fast, high build, one-coat application
- Simple, seamless, fast-cure membrane.
- Excellent chemical resistance
- Wet areas
- External (non-exposed) - balconies, roof-decks, sill or window flashings, podiums, planters.
- External (exposed) - non trafficable areas
SILCOR® 560 LS a high performance, low odour, one-part, fast-curing, high solids, pure polyurethane elastomer waterproof membrane.
- Simple, seamless, fast-cure membrane.
- Excellent chemical resistance
- Waterproof
- Permanently flexible
- Wet areas
- Tanking
- Horizontal application with self-leveling
SILCOR® 560 LVOC is a unique, low VOC, high performance, low odour, one-part, fast-curing, high solids, polyurethane elastomer, liquid waterproof membrane. It is specially formulated for easy roller application of all permanently flexible, tough, high-build, long-life waterproof barriers.
- Low VOC
- Easy, fast, one-coat application with brush or roller is possible
- Simple, seamless, fast-cure membrane
SILCOR® 575 is a one-part, high performance, polyurethane membrane. When combined with SILCOR® Top Coat 80, provides a durable, UV-resistant, foot-trafficable waterproofing system for roofs, decks and plant rooms.
- Easy and low cost to install, maintain or refurbish
- Quick access for trades
- Waterproof
- Plant room floors
- Balconies
- Roof-decks
SILCOR® 580 is a tough, resilient, polyurethane elastomer-based layer rubber barrier giving long-life waterproof protection. It is a premium grade, low VOC elastomer using the latest technology to provide long-life, protective barriers to prestige construction projects.
- Long-life, permanently flexible
- Total adhesion
- Fully monolithic structure
- Exposed roofing, decks and podiums
- Car parks and ramps
- Compactor room floors, plant rooms and wash rooms
SILCOR® 780 HI-LP is a two-part, moderately fast-curing, hybrid polyurea, spray-applied elastomeric coating. It provides a premium quality, high build, long-life protective coating to concrete and metal substrates on major civil, infrastructure and commercial construction projects.
- Simple application
- Long life
- Slower cure provides smooth surface finish
- Water treatment plants
- Roof decks
- Podium slabs
SILCOR® 900MP is a premium performance two-component spray-applied seamless waterproofing membrane that cures within 2 minutes to form a high-strength, elastomeric, and fully-bonded waterproof membrane. Silcor 900MP is extremely durable with excellent wear and chemical resistance and does not normally require additional protection against mechanical damage.
- Seamless
- Rapid-set
- Robust
- Roofs
- Podium decks
- Terraces
SILCOR® 990MP is a two-part, fast-curing, pure polyurea, spray-applied elastomeric coating.
- Simple application
- Potable water certified
- Suitable for continuous immersion
- Long-life
- Concrete and metal substrates on major civil, infrastructure and commercial construction projects
A fast-drying, single-pack, modified polyurethane primer for use with all polyurethane and polyurea based membranes.
- Strong physical bond to substrate
- Fast-drying PU resin system
- Coating is water-resistant and protects the structure in the event of interruption by wet weather
- Promotes adhesion even in cold weather
SILCOR® Primer BW N105-DT is a two-component, solvent-free epoxy primer, recommended for use with concrete, masonry
and steel.
- Fast-cure
- 100% solid content
- Excellent penetration and adhesion to substrate
The surfaces of new concrete should be lightly blast abraded or mechanically abraded to
remove laitance. Dust and debris created from blasting or sanding should be removed by
sweeping or vacuum cleaner. Surface must be clean, sound, smooth and free from dust,
laitance, loose matter, oil or other contaminants.
Pour the hardener into the resin and mix thoroughly for 5 minutes until the colour is uniform
using a low speed drill at 200 to 300 rpm. Do not mix more than is required because the
material will gel and harden.
Heat is generated when the resin and hardener reacts and temperatures will increase over
time. Apply soon after mixing. Never mix more than one batch at a time in a single container
as this may cause a premature exothermic reaction with production of intense heat and
smoke.
Apply SILCOR® Primer BW N105-DT by brush, roller or rubber squeegee. Application
temperatures must be between 10°C and 40°C with <85% relative humidity, and at
least 3°C above the dew-point temperature.
SILCOR® Top Coat 80 is a tough, fast-curing, non-slip, aliphatic polyurethane coating designed for protection of SILCOR® membrane systems in exposed situations. SILCOR® Top Coat 80 is UV-resistant. It provides a durable, service foot-trafficable finish to roof and deck areas.
- Simple application, easy to use and fast-cure
- UV-resistant and foot-trafficable
- Fast-cure — quick access for trades
- Used for colour-stable, non-slip exposed areas on plant room and lift motor room, roofs, balconies, decks, perimeter turn-ups, penetrations and sill or window flashings
Accessories
- Accessory Name
- 描述
- Key Benefits
- Applications Type
SILCOR® LM PU Sealant is a high performance elastomeric joint sealant based on proven polyurethane elastomer technology. Silcor LM PU Sealant is a neutral cure system that reacts on exposure to atmospheric moisture. When cured, it forms a durable waterproof seal, which makes it suitable for most applications.
- Good UV resistance, long life
- Single-pack — no mixing
- Low modulus for high movement
- Ideal for sealing joints in concrete panels, tiles, fibrous cement products, external cladding panels, block work and brickwork
SILCOR®
SILCOR® is a high-performing cold-applied, seamless waterproofing system for podium decks, green roofs and terraces. The range of products include both spray and hand applied. The SILCOR® series is generally foot-trafficable in under two hours, depending on application. The polymeric structure accommodates most designs without compromising waterproofing performance and while being fully compatible with other GCP waterproofing solutions.
ADPRUFE®
ADPRUFE® is an innovative liquid admixture that significantly reduces both the permeability and drying shrinkage of concrete. When used in combination with ADVA® superplasticisers, this enhanced concrete performance reduces water absorption and penetration providing a significant reduction in drying shrinkage which produces fewer and thinner cracks.
SERVIDEK™ and SERVIPAK™
Designed specifically for deck waterproofing, SERVIDEK™ consists of a cold-applied waterproofing system that consists of a rubber/bitumen compound with a protection board, SERVIPAK™, applied on top. SERVIPAK™ is designed for heavy duty and is capable of accepting sand carpet and hot rolled asphalt. SERVIDEK™/SERVIPAK™ is both robust and fast-curing, with SERVIDEK™ serving as both a waterproofing membrane and an adhesive for SERVIPAK™. The combined system is able to accept road laying equipment in just four hours. Lastly, SERVIDEK™ conforms to irregularity in the substrate surface, while SERVIPAK™ allows indentation in the base coarse aggregate in order to provide resistance to braking.
